In the process of using the self-propelled mosquito fog machine, most of the pesticides have strong corrosiveness, which will affect the service life of the mosquito fog machine. Therefore, it is necessary to regularly maintain the mist mister reasonably. Specifically, the following points should be done. :

When using the self-propelled mosquito fog machine, you should read the instruction manual carefully, understand the correct use and maintenance methods, etc., and strictly follow it. The rotating parts should be lubricated with lubricating oil according to the regulations, and each fixed part should be firmly fixed. Each connecting part should be firmly connected, tightened and sealed, and the missing gasket or the aging gasket should be filled or replaced to prevent leakage of liquid or powder.

After the self-propelled mosquito fog machine the medicine, the medicine box, the infusion (powder) tube and each working part should be emptied, and cleaned with clean water. Sprayers that have been sprayed with herbicides, such as those used to spray insecticides, must be thoroughly cleaned with alkaline water.

When the self-propelled mosquito fog machine is not suitable for long-term storage, use hot water, soapy water or alkaline water to clean all parts, and then clean them with clean water. The rubber products and plastic parts on the fog machine should be placed in a dark and low temperature place. When stored in winter, they should be kept in their natural condition and not be bent or stressed too much.

It should be noted that the parts belonging to metal materials on the air mosquito fog machine should be avoided from rusting, and at the same time, they should not be put together with corrosive things such as fertilizers and pesticides. Worn and damaged parts should be repaired or replaced in time to ensure good technical condition during operation.