China mist making machines are common artificial fog equipment, and they play an important role in garden landscaping. Although china mist making machines are very useful, they also need to be operated correctly in order to make them perform as expected. Be sure to follow these tips when using china mist making machines.

1. Before using china mist making machines, be sure to check the main unit of the equipment to see if there is any abnormality, especially the electronic control part, be sure to ensure that it can work normally. If the cable ends are loose or fall off, take care of them.

2. If the china mist making machines are not used for a long time, the water pump should be checked to see if there is a lack of oil. If the water pump has loose parts or water seepage, be sure to pay attention.

3. Check whether the power cord connection of the device is normal. If the wiring is wrong, the device will definitely not be able to operate normally.

4. Check the high-pressure water pump. You can turn on the manual working mode to check whether the water pump can be started. If the indicator light is not on, further check to see what the problem is.

5. Adjust the rated working pressure of the water pump. If the pressure setting value is incorrect, it will also affect the use effect of the equipment.

6. If the china mist making machines are short of water, the water shortage protection buzzer will also be affected, so check frequently to avoid water shortage in the equipment.

7. The electronic control part of the equipment cannot be changed at will, otherwise it is easy to bring security risks. Once an electric shock accident occurs, it will not only damage the equipment, but also bring harm to personnel.

8. The water tank must be checked regularly. If there is dirt, it should be cleaned up, and the filter system should be kept smooth to avoid blockage. Therefore, the filter cotton of the filter system should be replaced regularly.

In short, china mist making machines must be operated correctly. If it is the first time to contact the equipment, then you must be familiar with the use methods and procedures of the equipment. It is best to receive relevant training and guidance, so as to ensure that the equipment is used in an ideal state.