1. Do not loosen or readjust the speed limit bolts and fuel controller bolts during operation of high pressure fog machine china, otherwise it will directly affect the mechanical performance.

2. If the external equipment of the continuous generator runs abnormally, works slowly or stops suddenly during operation, the switch of the generator set should be turned off immediately, the connection between the equipment and the unit should be disconnected, and the problem should be checked.

3. If there is a current overload, use the circuit to trip, reduce the load of the circuit, and restart after a few minutes.

4. The DC output terminal is only used for charging the battery. (cannot be used for other types of loads)

5. Before charging the high pressure fog machine china battery, do not cut off the wire on the negative pole of the battery first. The positive pole of the battery is connected to the positive pole of the DC output terminal of the unit. Do not make a wrong connection, otherwise the unit and battery will be damaged.